The MALOJA electric glider is a surface-controlled model aircraft. All servos are installed in the fuselage.
To optimize the center of gravity, two motor mounts and two tail booms are included.
The motor mount can be printed with a length of either 75mm or 85mm.
The tail boom variant A is printed with two wall lines, and variant B with one wall line.
The motor mount and tail boom are screwed to the fuselage center section.
This allows for the replacement of the damaged part in the event of a crash.
The wing control unit is also screwed to the fuselage.
Furthermore, two wing and tail assembly variants are available.
Wing A has an elliptical shape and an MH32 airfoil, while wing B has a trapezoidal shape and an HS16 airfoil.
On tail assembly A, the control surfaces are attached with an adhesive hinge, and on tail assembly B with a film hinge.
Accessories such as control levers (aluminum), brass tubes, round steel and neodymium magnets can be obtained.
Technical data:
Wingspan: 2500mm
Length: 1260mm (including spinner and tail assembly)
Weight ready to fly: approx. 2550g (depending on equipment and filament)
Wing loading: ~55g/dm²
Wing A: Airfoil MH32
Wing B: Airfoil HS16
Root chord: Wings A+B 210mm
Center of gravity: 73mm
Incidence angle: 1.5° (adjustable)
Diffusion: 2.0° per side
Finger joiner and bearing: 11mm brass tube with 10mm carbon rod
V-tail: 110° opening – symmetrical airfoil
Motor: ROXXY BL Outrunner C35-48-06-700kV
ESC: SunriseModel ICE 60A BEC 7.4V/6A
Spinner: 55mm aero-naut for 5mm Motor shaft
Folding propeller: 12 x 6.5
Battery: ROXXY LiPo Evo 4S/30C/3000
Download: Instructions MALOJA
Amount: 59,00€ EUR
After payment, you will receive an email with a download link for the ZIP file (approximately 22MB).
The ZIP file can be downloaded a total of two times; after that, the link will be deactivated.
The ZIP file contains: STL files, 3MF files, JSON files, and a PDF manual
ACCESORIES
The accessory package contains the following parts:
2x Control lever milled from aluminum, including M4 grub screw
1x brass tube 11mm/10mm, 60mm long
2x brass tubes 11mm/10mm, 150mm long
2x stainless steel round bars 6mm, 75mm long
2x neodymium magnets 20x5x2mm
Amount: 119,00€ EUR Including shipping within the EU (For shipping outside the EU, please contact us)
When paying, please check whether the correct shipping address is entered.
Shipping takes place in a bubble envelope in C5 format.
Delivery time 5-8 days